How do I charge the Mobot?
Charging your Mobot is really easy, but it does take around an hour to charge from a completely dead battery, so leave yourself some time before a planned lesson to check your robot and recharge it if necessary. In order to charge Mobot, simply open up your Accessory Kit inside the RobotsLAB BOX and pull out the Mobot charger, and remove the blue 9v batteries from the robot body, or from the Accessory Kit. The charger is white, with two sockets for 9v batteries. There's no cord to worry about, simply fold the prongs out and plug the charger into your outlet. While Mobot is charging, the light on the front will glow red; once Mobot is charged the light will glow a solid green. Charging usually takes between 20 minutes to 2 hours, depending on how depleted the battery is. We recommend checking your Mobot with enough time before your lesson to charge it up if the battery is low. We also suggest you charge Mobot for a little while after your lesson, so it goes back into the BOX ready for the next teacher!